Auto Detailing Clay Bar

An auto detailing clay bar is the most effective contaminant removal product. It was invented in Japan in 1990 and it is used for automotive reconditioning and detailing, and in the auto body shop profession for the removal of rail dust, brake dust, industrial pollution and overspray.

What are the materials used in the making of auto detailing clay bar?

A clay bar is basically polybutene that contains some mild abrasives. You may find a company that claims that their product does not contain any abrasives, but in reality all detailing clay bars are abrasive. The degree of abrasiveness can, however, vary. Bars with a high degree of abrasiveness are usually identified as ‘hot bars’.

An auto detailing clay bar contains a mixture of tiny abrasive articles and powdered synthetic detergent. The effectiveness of a clay bar depends on the contamination. You may not be able to completely remove rail dust, but the clay will take care of the protruding particles. It removes overspray easily.

How to use an auto detailing clay bar?

Lubricant: The first step for removal of unwanted particles from your car is applying a clay lubricant or a mixture of shampoo and water to the affected area. The lubricant will provide the slip that is required for using the clay bar. You don’t want the clay sticking to the surface; it should slide over it easily. A lot of auto detailing clay bar manufacturers offer clay bar lubricants to be used with their product. A home made mixture of water and shampoo can also do the job.

Plastic bag test: A plastic bag will enable you to feel the contaminated areas on your car that you were not able to detect with your naked finger. Cover your fingers with a plastic bag and check the surface, and do another inspection after using the clay bar to check the difference.

Procedure: Before applying the lubricant, wash and dry your car. Some experts prefer using the clay on the washed car without drying it. Spray the lubricant over a small area (2 by 2 inches). Mould the clay by squeezing into your hand. Once it becomes pliable roll it into a ball and flatten it into a disc shape. Hold the clay bar in the palm of your hand and glide it across the sprayed area. As the clay bar moves over the lubricated area, you will feel and hear particles getting attached to it. Keep working on an area until the auto detailing clay bar moves easily and you don’t feel or hear any contaminants anymore.

Always apply little or no pressure to the clay bar. Pushing too hard will create scratches. Back and forth movement technique is good for claying because it will help you keep track of finished areas. Use a cloth to wipe off the lubricant after you’re finished.

If the clay falls on the ground, remold it before using it again. The clay bar may pick up contaminants from the ground which can potentially damage your car paint. An average auto detailing clay bar should be enough for 5 to 10 cars, depending on the condition (contamination) of the car.

We hope you enjoyed reading our article about ‘Auto Detailing Clay Bar’. Why not follow other readers who saved an average of $423 on their car insurance, by simply using our FREE car insurance quote service at the top of this page. It only takes a few minutes and you could save hundreds of dollars.

Most readers think that’s pretty good…

Thanks again for taking the time to reading our article, we hope you enjoy the rest of your day!

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.